Classic series entrance door - Superdor entrance doors interior doors

Classic door model 2515

The standard entrance door, known as a steel door, is made of two steel cores. The outer core is called in the professional language - the "narrow mantle" and the inner core is called - the "broad mantle". The cores are made of galvanized steel with a thickness of 1.25 mm. Between the cores are attached reinforcing ribs called "lengths" in the professional language. A telescopic part called an "insert" is attached to the bottom of the entrance door, its function is to optimally adjust the space between the door and the floor. There is rubber around the perimeter of the door that helps with thermal insulation Acoustic. Between the ribs of the reinforcement as defined as "lengths" there is a "rock wool" filling that helps with acoustic thermal insulation. Electrostatic painting at a temperature of 200 degrees

Classic door model 2498

The standard entrance door, known as a steel door, is made of two steel cores. The outer core is called in the professional language - the "narrow mantle" and the inner core is called - the "broad mantle". The cores are made of galvanized steel with a thickness of 1.25 mm. Between the cores are attached reinforcing ribs called "lengths" in the professional language. A telescopic part called an "insert" is attached to the bottom of the entrance door, its function is to optimally adjust the space between the door and the floor. There is rubber around the perimeter of the door that helps with thermal insulation Acoustic. Between the ribs of the reinforcement as defined as "lengths" there is a "rock wool" filling that helps with acoustic thermal insulation. Electrostatic painting at a temperature of 200 degrees

Classic door model 2504

The standard entrance door, known as a steel door, is made of two steel cores. The outer core is called in the professional language - the "narrow mantle" and the inner core is called - the "broad mantle". The cores are made of galvanized steel with a thickness of 1.25 mm. Between the cores are attached reinforcing ribs called "lengths" in the professional language. A telescopic part called an "insert" is attached to the bottom of the entrance door, its function is to optimally adjust the space between the door and the floor. There is rubber around the perimeter of the door that helps with thermal insulation Acoustic. Between the ribs of the reinforcement as defined as "lengths" there is a "rock wool" filling that helps with acoustic thermal insulation. Electrostatic painting at a temperature of 200 degrees

2020 model door

The standard entrance door, known as a steel door, is made of two steel cores. The outer core is called in the professional language - the "narrow mantle" and the inner core is called - the "broad mantle". The cores are made of galvanized steel with a thickness of 1.25 mm. Between the cores are attached reinforcing ribs called "lengths" in the professional language. A telescopic part called an "insert" is attached to the bottom of the entrance door, its function is to optimally adjust the space between the door and the floor. There is rubber around the perimeter of the door that helps with thermal insulation Acoustic. Between the ribs of the reinforcement as defined as "lengths" there is a "rock wool" filling that helps with acoustic thermal insulation. Electrostatic painting at a temperature of 200 degrees

Classic door model 2507

A completely classic door in a light color in shades of white-cream, giving place to subtle, quiet and decorative decorations that create interest, in combination with a designed handle. Electrostatic painting at a temperature of 200 degrees

Classic door model 2503

A classic door with a smooth and clean appearance of one shade of color, with internal frames that create a division between the large upper part and the small lower part, giving it an elegant and delicate appearance. Electrostatic painting at a temperature of 200 degrees

Classic door model 2016

Contrasting colors that create an interesting combination and the meeting between the two dark and light shades is in a rounded line along the entire length of the door, which gives a refined and very pleasant look. The handle chosen for him is also classic - a clean handle without decorations with an elegant appearance. Electrostatic painting at a temperature of 200 degrees

Classic door model 2501

A door with a precise design that creates and meticulously rectangularity that is emphasized by means of 2 internal frames that get smaller with their depth, and in the center of which are embedded three decorative bolts that add interest and lightness and maintain the squareness. The chosen shade is royal blue which gives a royal and luxurious touch. Electrostatic painting at a temperature of 200 degrees

Classic door model 2511

A door with a smooth and clean appearance, in almost monochromatic colors in identical shades in different shades of gray, which blend together along the entire length of the door in a pleasant and flowing circularity, and in the area of the handle which blends with the forms to form a semi-circle out of nowhere. Electrostatic painting at a temperature of 200 degrees

Classic door model 2508

A door with a particularly special form, through internal division by embossing and decorations that create an interesting combination and unique play of light and shadow. The striking line of this door is its very strong aesthetics in front of the authentic decorations on it, which makes it a classic door that cannot be ignored Electro painting - Static at a temperature of 200 degrees

Classic door model 2505

A door with a sweet and classic look, due to its square structure combined with an internal window. The structure of the door is rectangular and has internal frames that strengthen its structure and in the center is a window with a sealed and insulating frame. The window is secured about a decorative lattice in an upgraded rustic style: using circular shapes, but maintaining cleanliness and aesthetics. Electrostatic painting at a temperature of 200 degrees

Classic door model 4016

The standard entrance door, known as a steel door, is made of two steel cores. The outer core is called in the professional language - the "narrow mantle" and the inner core is called - the "broad mantle". The cores are made of galvanized steel with a thickness of 1.25 mm. Between the cores are attached reinforcing ribs called "lengths" in the professional language. A telescopic part called an "insert" is attached to the bottom of the entrance door, its function is to optimally adjust the space between the door and the floor. There is rubber around the perimeter of the door that helps with thermal insulation Acoustic. Between the ribs of the reinforcement as defined as "lengths" there is a "rock wool" filling that helps with acoustic thermal insulation. Electrostatic painting at a temperature of 200 degrees

Classic DGP 2499 door

The standard entrance door, known as a steel door, is made of two steel cores. The outer core is called in the professional language - the "narrow mantle" and the inner core is called - the "broad mantle". The cores are made of galvanized steel with a thickness of 1.25 mm. Between the cores are attached reinforcing ribs called "lengths" in the professional language. A telescopic part called an "insert" is attached to the bottom of the entrance door, its function is to optimally adjust the space between the door and the floor. There is rubber around the perimeter of the door that helps with thermal insulation Acoustic. Between the ribs of the reinforcement as defined as "lengths" there is a "rock wool" filling that helps with acoustic thermal insulation. Electrostatic painting at a temperature of 200 degrees

Classic door model 2509

The standard entrance door, known as a steel door, is made of two steel cores. The outer core is called in the professional language - the "narrow mantle" and the inner core is called - the "broad mantle". The cores are made of galvanized steel with a thickness of 1.25 mm. Between the cores are attached reinforcing ribs called "lengths" in the professional language. A telescopic part called an "insert" is attached to the bottom of the entrance door, its function is to optimally adjust the space between the door and the floor. There is rubber around the perimeter of the door that helps with thermal insulation Acoustic. Between the ribs of the reinforcement as defined as "lengths" there is a "rock wool" filling that helps with acoustic thermal insulation. Electrostatic painting at a temperature of 200 degrees

Classic warehouse model door

The standard entrance door, known as a steel door, is made of two steel cores. The outer core is called in the professional language - the "narrow mantle" and the inner core is called - the "broad mantle". The cores are made of galvanized steel with a thickness of 1.25 mm. Between the cores are attached reinforcing ribs called "lengths" in the professional language. A telescopic part called an "insert" is attached to the bottom of the entrance door, its function is to optimally adjust the space between the door and the floor. There is rubber around the perimeter of the door that helps with thermal insulation Acoustic. Between the ribs of the reinforcement as defined as "lengths" there is a "rock wool" filling that helps with acoustic thermal insulation. Electrostatic painting at a temperature of 200 degrees

Classic door model MLI

The standard entrance door, known as a steel door, is made of two steel cores. The outer core is called in the professional language - the "narrow mantle" and the inner core is called - the "broad mantle". The cores are made of galvanized steel with a thickness of 1.25 mm. Between the cores are attached reinforcing ribs called "lengths" in the professional language. A telescopic part called an "insert" is attached to the bottom of the entrance door, its function is to optimally adjust the space between the door and the floor. There is rubber around the perimeter of the door that helps with thermal insulation Acoustic. Between the ribs of the reinforcement as defined as "lengths" there is a "rock wool" filling that helps with acoustic thermal insulation. Electrostatic painting at a temperature of 200 degrees

Model 2500 door

The standard entrance door, known as a steel door, is made of two steel cores. The outer core is called in the professional language - the "narrow mantle" and the inner core is called - the "broad mantle". The cores are made of galvanized steel with a thickness of 1.25 mm. Between the cores are attached reinforcing ribs called "lengths" in the professional language. A telescopic part called an "insert" is attached to the bottom of the entrance door, its function is to optimally adjust the space between the door and the floor. There is rubber around the perimeter of the door that helps with thermal insulation Acoustic. Between the ribs of the reinforcement as defined as "lengths" there is a "rock wool" filling that helps with acoustic thermal insulation. Electrostatic painting at a temperature of 200 degrees

Classic door model 2499

The standard entrance door, known as a steel door, is made of two steel cores. The outer core is called in the professional language - the "narrow mantle" and the inner core is called - the "broad mantle". The cores are made of galvanized steel with a thickness of 1.25 mm. Between the cores are attached reinforcing ribs called "lengths" in the professional language. A telescopic part called an "insert" is attached to the bottom of the entrance door, its function is to optimally adjust the space between the door and the floor. There is rubber around the perimeter of the door that helps with thermal insulation Acoustic. Between the ribs of the reinforcement as defined as "lengths" there is a "rock wool" filling that helps with acoustic thermal insulation. Electrostatic painting at a temperature of 200 degrees